DavidF
DavidF
@davidf
Honorable Member
Joined: September 26, 2020 11:31 am
Last seen: April 19, 2024 8:15 am
Topics: 12 / Replies: 350
Reply
RE: Stuck wheel Nuts

There is an old thread about anti-seize grease causing the wheel nuts to weld onto the interface of aluminum wheels, requiring the nuts to be removed ...

2 days ago
Reply
RE: Recommended Engine and GDU oil

I always have. Many also run Neo Sythetics 75w90 which might be better? IDK. I think more important is to ensure the exact right amount is in your ...

2 days ago
Reply
RE: Stuck wheel Nuts

260 foot-pounds

5 days ago
Reply
RE: F1 Style Halo / Center protection

@rjbender Excellent point and idea Rod. I will see if I can fit a temp strip where you indicated.

5 days ago
Reply
RE: F1 Style Halo / Center protection

@rjbender Hi Rod, Yes, these are what I have on my SR3 uprights -- Temp range B 71 to 110 C. I have reached 104 C on my uprights and beginni...

1 week ago
Reply
RE: Radical Racing Simulator Options?

@parsonsj It begins with a driving sim cockpit which holds the screen, pedal set, steering wheel, keyboard tray and mouse, and is your seat. T...

1 week ago
Reply
RE: Installing SmartyCam3 corsa camera on 2014 SR3

I just switched from the SmartyCam 2.2 HD 2.2 to the 3.0. on the 2.2 my GPS09 plugged into the camera, and the camera plugged into a CAN hub. On the...

1 week ago
Reply
RE: Radical Racing Simulator Options?

I use iRacing mostly, and Assetto Corsa for tracks that are not in iRacing. They are very helpful in learning the tracks and getting faster, but ther...

1 week ago
Reply
RE: Dry break to normal fuel cap?

Below is a picture of the fuel cell foam being prepared for the fuel cell. This was from my 2021 SR3 XX which required a baffle upgrade to keep the f...

1 month ago
Reply
RE: Dry break to normal fuel cap?

My car is the same. There is fuel cell foam in the fuel cell, which I suspect causes flow restriction. Without the foam, the fuel will move to the o...

1 month ago
Reply
RE: Waking up SR3 / #254 / 2006 Supersport from long storage

@speedstarincdjb Hi Don. I have a recent story to tell about TPS which might be relevant; I assure you I do not mean to hijack your interesting th...

2 months ago
Reply
RE: Just winging it

@rjbender Hi Rod. Yes, and your way makes sense. On the main wing, lowest down force would be the 4th from the bottom. "From the bottom" is spec...

2 months ago
Reply
RE: Just winging it

The Handling Guide has this to say about aero adjustments: This is a very brief description, but that is basically all there is to it. To de...

2 months ago
Reply
RE: Just winging it

My perspective is just for SR3. TL;DR: hole 3 from the bottom on the main wing, 6 from the bottom on the subwing, and no diveplanes on the nose. ...

2 months ago
Reply
RE: Adding preload to shocks

I go entirely by feel to determine whether the fronts or rears are locking. You can feel the difference in your hands and body whether it is front or...

3 months ago
Page 1 / 25