Last seen: February 16, 2023 11:22 am
The Dual needs a separate power input in addition to the 5 pin 712 connection. The cable that connects to the SC3 Sport will plug into the Dual. Power...
I'm just seeing this thread. The Radical and AiM integration are a difficult issue. To start defining things, it's important to know the players - AiM...
The MXL2 has been discontinued, so there are no deals on them 🙁 I do have all the other AiM dashes in stock and am happy to help out. I usually do Bl...
As far as I know, the FSW is the same, but I'm not an expert on the Radical install. If you call and ask the guys at AiM, they will be able to make su...
What dash do you have? Strada dashes do not log, so I assume you have the Strada Logging module with the SD card? I would start with moving the beacon...
There have been some FW problems with the SLM on different systems. You can try unplugging it from the system and powering the PDM, then plugging in t...
Think of it has 3 separate systems. You have found the way to connect to the PDM. The SCHD is connected with the USB Mini connector next to the SD car...
The GS Dash is a slave to the PDM. Depending on the wiring in the car, it would need a data hub. The GS Dash is then just programmed as a CAN Expansio...
The shift lights would be just like in the above example. I haven't plugged into an SR3 XX yet, but it should configure just like the video above show...
Hey guys - talking to AiM, there isn't much of a standard for how the data portion of the cars was handled. For the SR3-XX, it has a PDM in it. I beli...
On the PDM, change the Smartycam feed to GPS Speed. Then you will get GPS speed into the camera. It sounds like you have a either bad wheel speed sens...
So you have a PDM32, Radical wheel, and SCHD GP 2.2. The first thing to do with all the components is make sure the FW is up to date. Then, make sure ...
It varies slightly depending on which dash and camera you have. Can you post what you have and/or a photo of the dash and camera? With that, I can wal...
Did you leave a message? I was at Mid Ohio this week and will be at Road America this week. Give me a call Monday and if I can't answer, leave me a me...
I'm happy to help out. Give me a call at 603-232-9096. I would check the connections and that the SC cable isn't damaged. Odd the RPM would drop...