Last seen: April 6, 2023 8:47 am
Thanks Charley - this will be useful for me as I’m having a water temp display issue on the dash (sender is working because I can see it when I plug i...
This is a long shot, but does anyone have any spare sockets for the Sure Seal receptacle? I was going to assemble my own connection to the pump out, ...
@charleyhradicalsportscarregistry-com @ntf3000 Thanks for the comments. Looks like I'll be pulling the motor in the coming weeks. @Charley - you...
Thanks @rlm-dan and @charleyhradicalsportscarregistry-com Noted on tracking hours properly. Sorry I was not clear before - the picture of the ...
@charleyhradicalsportscarregistry-com Thanks Charley - It's true the hours are hard to track. I've created my own spreadsheet to log the on-track ...
@rlm-dan I’m not sure what engine temp is as the sensor is not sending to the dash properly. Oil temp is at the min reading of about 45C. But since...
@rlm-dan attached is a pic. Do I need one of it removed? I think the issue is definitely this sensor because the blue housing can spin around fre...
I have an additional question. Is the temperature sensor on the left side of the block an OEM hayabusa sensor? Or is it something different? Thinking ...
Thanks @rlm-dan! My dash is reading temp from the other sensor on the side of the block, so I think the entire standoff can be removed. Feels good t...
Hi Dan, The old rotors I pulled off are the same diameter as the new ones I purchased (from Spring Mountain). I assume they are OE but not entirely ...
FWIW I just took apart my master cylinders due to leaking on front and clutch. Here were my sizes: front: 0.70” rear: 0.75” clutch: 0.625” Th...