Crit Scholer
Crit Scholer
@crit
Estimable Member
Joined: August 23, 2019 3:01 am
Last seen: November 30, 2021 7:58 am
Topics: 45 / Replies: 190
Topic
Replies: 1
Views: 520
Topic
Replies: 2
Views: 646
Reply
RE: Oil Pre Heater, anyone using one?

@gwt561324, Thanks for link! After an hour what does it raise the oil temp to? I know it won’t heat the oil in the bottom of the pan so when you first...

4 years ago
Reply
RE: Oil Pre Heater, anyone using one?

@gwt561324, which one did you get and how did you mount it to the tank?

4 years ago
Topic
Replies: 8
Views: 986
Reply
RE: Newbi

@hende, you're on the other side of the pond and drive on the wrong side of the road. 😆 Still glad to have you on the forum!

4 years ago
Reply
RE: Newbi

@hende, Welcome to the forum and congrats on your SR3. Where are you located and what’s your plan for the SR3. Post some pics and make sure to add you...

4 years ago
Reply
RE: Idling and tuning

@meatman, my guess is and it might be off is possibly clutch basket/clutch play. Might be worth draining the oil and removing the clutch cover and ins...

4 years ago
Reply
RE: Idling and tuning

@meatman, how about clutch in and in gear? Does the noise disappear?

4 years ago
Reply
RE: Idling and tuning

Hard to tell from the video if the engine is stumbling or if that noise is coming from the clutch, I would recommend pushing the clutch in and putting...

4 years ago
Reply
RE: Short Stroke SR3 Engine

@kskins1 Is this a K7 or K8? Setup for dry or wet sump?

4 years ago
Reply
RE: Does anyone have ideas how I could fix this issue with my shift actuator?

@gobble, yup, they are just like the plastic ice maker connectors, push the sleeve into the fitting and the hose pulls out.

4 years ago
Reply
RE: Fuel choices

@tommymills, 100LL is formulated to burn best at higher altitudes and lower RPMs 1500-3000.

4 years ago
Reply
RE: Adding a gear display/reverse gear cable

@meatman Hi Josh, congratulations on your SR3 purchase and welcome to the forum. Here is a recent post about adding a gear indicator: In regards ...

4 years ago
Page 1 / 16