It's a larger car and generally more expensive for consumables. Tires, fuel, oil and parts will run you more. I recently had to replace my fuel bladde...

I finally removed my fuel bladder. It's not hard after you figure out the steps to get there. The one difficult part however was removing the bl...

Thanks for your input. Interesting they have an AL option, I'm not sure what to think of that. Curious - does the lower skirt come off on its ow...

Good info, thanks for the feedback. I've tried to pull the air release slowly but takes too much finesse and not always guaranteed. I'm running an ...

Update. I got a hold of Lister direct. They said 'The seal you are missing was discontinued at least 5 years ago, it was added as a precautionary meas...

I called the guys at XRP this afternoon. They mentioned early generation air jacks only had one seal, but based on my photos and yours Charley this is...

@thunder1375 Are the upper and lower seals supposed to be the same size? mine are and doesn't seem they should be. I did manage to put th...

Took it back apart. Where is this 2nd seal supposed to go? The AL portion is narrower and had a much larger OD.

Hang on a minute, is there supposed to be two seals here? That must be it. How does the other one orient?

Seals are installed the say way it was before (don't have a baseline reference). It behaved this way before seal installation and after. Can you confi...

Rod, 1. When the car drops after putting my weight on it, it stays in that position after I let go. 2. The other corners don't behave the same...