Hi all....recently purchased my first Radical...a 2013 SR3RS. Using Race Studio 2, I connected to the AIM MXL Pista. I first downloaded and saved the configuration file. I then cloned the file so I could make changes to the dash display. First, on the Select Configuration tab, I changed the Speed from km/h to mph and changed the Temp from deg C to deg F. This automatically changed the units on the Channels tab. However, it did not adjust the Low Scale or High Scale values. Do these need to be changed to properly report the correct data? If so, I could convert the existing values from km/h to mph and deg C to deg F. But while I am messing with this, I would love to validate the range of each sensor if the range does matter. Is there a standard document which has all of the specs for these sensors? Or am I able to get the original factory configuration file?
My second question has to do with the alarm values. The alarm setup in the configuration file had sensors that differed from the dash sticker labels. So I was able to fix that to include water temp high and low, fuel pressure, oil temp high and low, and oil pressure. However, I do not have all of the correct alarm settings. Is there a document that specifies where these should be set?
