Josh Spray

I got sick and tired of the cable never really working well. I will make some labels for each button but for now the far right (#4) button I push for 5 seconds and reverse gear happens. Button to t...

Thank you for the tip! I believe it to be a stock oem ecu as there is tape on the top with writing "'08 OEM"

@rlm-dan What is your thoughts on tuning an OEM 2008 Suzuki ecu with some sort of aftermarket device?

Found an answer that it can be reused on an earlier thread from Charley about hear swaps. Any suggestions on how many times they can be reused?

Is the GDU cover gasket re-usable? If so how many times until recommended to be changed?

My goal one day is to be.....

Awesome, thank you for all the great info Dan. I'm wondering if the orientation of the taller trumpets matter at all. Originally the two longer trumpets are placed in the middle and angled away from e...

I am looking to buy a replacment set of these as mine are fairly hard and like to not stay on once clamped. Can anyone give a suggestion on where to order them from? Please dont say a dealer lol ...

I had an interesting issue this past track day. After the second session I went to turn my car off and turned the master switch to off and the car kept running?!?! First occurrence I was dumbfounded.....

I haven't driven the car since last August and was checking fluid levels as I have a few "drips" here and there. My GDU needs a ml to get back up to full and I because my memory is terrible I start...

I have a feeling with your fresher tires (mine are 4 seasons old now) I wont be able to hang with you Jeff. 🙁

My OEM oil pressure sensor has failed internally and is leaking through the sensor. Seeing as how is not hooked up to anything at this point I was just going to buy a plug to replace it. So the inter...

@rjbender yeah, actually I do. I don't remove the hitch from the truck but I raise it up quite a bit. My trailer is 36ft long so what height I do get out of the front makes a huge difference in the re...

Custom Yo.... lol Attachment : PXL_20210420_035022653.jpg Attachment : PXL_20210420_035017796.jpg

Sometime next year I am planning on ripping out all the wiring from SR3 and installing a Haltech Elite ecu with the wideband O2 feedback. This will be far superior to any "factory" ecu for expansion...