Alex Heavens

The Geartronics’s stuff works great 👍 And the support is great too. I’m also running a geartronics valve block but with the blip valve as I’m still running a cable throttle, but controlled by ...

Layshaft bearing, comes in 3 parts when you get a new one. Outer race, inner race and a 3mm spacer. I’m now 2nd guessing and will have to have a look in my gearbox, but I think you need the 3mm spacer...

@parsonsj What/who’s valve block are you using? Yeah sure you probably could have bought an sr10, but they don’t sound anywhere near as good as the V8 🙂 And I think a good sr8 will have the edge over ...

@parsonsj Hi John, It could be an ftr with the bell housing machined off which is what some of the very early sr8’s with a hewland box ran. Don’t think there was too many of those. I’m not sure why th...

Hi Josh, That does look like a spacer issue that’s caused the failure’s. Possibly the spacer that looks like a washer (somewhere around 2-3mm thickness) and comes as part of the end case bearing for t...

Hi John, Very impressed with all the mods you have done. I’m surprised Jenvey didn’t tell you about the linkage they made to get rid of the short cable between the 2 banks. But looks like you have got...