Victor Ling

Thanks for the inputs, @davidf and @gwt561324. Looks like I should be ok for our sprint races without any ballast, especially since we start each race day with a full tank.

Wow, I'm surprised. I heard others in our club complained that they were at a disadvantage to the smaller guys, but in this case nothing would change. Do you have air jacks? That would be another 25...

My race series just adopted the Radical Cup 710Kg min weight requirement. Does anyone have experience with running at this weight? Ballpark how much ballast would I need as a 160lb driver and an SR3...

I'm not sure this is always the case. My Porsche made the journey from Germany to San Diego pretty much as scheduled, leaving in July and arriving in August. Many others on Rennlist had similar expe...

Last time I bought a brake disc it was $421. This was about 10 months ago.

Doing a full brake service including new seals and pistons in the calipers and replacing the master cylinders. Upon removing the existing master cylinders, I found that the front and rear MCs were re...

@GroupARacing - curious with your racers, how much slower are tires that are 5 sessions old?

Very nice post. I just removed the pistons from one caliper last night and found it to be difficult without risking scratching when pulling them out. These pistons don't have the outer ring part tha...

IMO, the current T-shirt logo based on the outline of a Radical would look strange on the Radical, because it's a picture of itself. Perhaps a more modern logo could be made using the name or initial...

@davidf - Sounds like you went with the full enchilada on the chassis setup. Quite an investment! Would be great to get your review on those items.

Attachment : 3_20_21 Race Photo T12.jpg #959 - This dust cloud made its way over from a another part of the track where someone had run out of track - picture taken by flying robot aerials

Just to add my experience to this thread, I am using a Bell GP3 also with the top spoiler installed. There is absolutely no issue with lift and this is without the wind deflector installed. I will s...

Hankook's competition tire guide lays out the procedure. I have never done it, but only because I'm my own pit crew and it's a bit of a pain. SCUFFINGThe longevity and consistency of thegrip level ca...

CDI 6004MFRMH Torque 3/4-Inch Drive Micro-Adjustable Wrench,torque 100 to 600 ft.lbs I'm using this. CDI is a Snap On brand, but prices are much lower. So far, it's worked great. Price has gone up...

Great input, Garrett. For others that may be interested there's a $100 rebate that lasts thru the end of the month. A few more days to decide..