CharleyH .

Hi Jeff, There should be a fuel pump relay somewhere. I think on those cars it was located on the bulk head near the ECU? I would be checking that, maybe try swapping with another and see if the probl...

I struggle with putting on/taking off the bodywork. I bought some suction cups on Amazon and they work great for this! Attachment : IMG_9439.jpeg Attachment : IMG_9438.jpeg

Thank you for the replies on this. We finally sorted out the issue with the assistance of Joshua Tidd (Radical USA Technical Support Engineer) and the team at Stradale. Here is the history (after th...

@charleyhradicalsportscarregistry-com thanks for the info! I'll give them a shout.

@jking85 and Charley this info is fantastic thank you so much

I did the same as Rod. I got tired of trying to manually control the temps with tape. I put the Suzuki thermostat back in and added a 215 degree oil thermostat from Improved Racing. It has worked g...

I did my own. I used an Odyssey extreme battery and put it in the passenger footwell. I made a foot bar to protect it so anyone in the passenger seat can’t kick it. I put it in this location becaus...

Took a Radical (#1351) to Ozarks International Raceway in central Missouri last weekend. For those who have not been, it is an exceptional track, only a few years old, and one of my favorite in the co...

@jpvintage62 Hi Julian, I wouldn't rush to buy another one... ... although as far as I'm aware the only difference from an 'aero' perspective between the XX and say an RSX is the rear wing end plate...

@jpvintage62 ... I've got an RSX and an XX and much prefer the RSX - it's lighter and simpler without the PDM/PDU. My XX was one of the last made and also came with the higher steering position stand...

ok this is working well in the garage and I will be at a chilly event this weekend to test further. Heater from HotShot is the unit I am using. Its better in real life than the website and Ken at Apex...

Myself and a friend have these installed - I dont have a pic to hand but the quick disconnect reciever is installed between the body and the rear diffuser...ill get a shot when im next near the car.....

Issue appears to be the crank position sensor wire (1 of 5 wires) in the bundle came loose on the motor. So going to remove the side cover and try to reattach Attachment : 2319119130046895166.jpg

@jamesmcga I agree with Charley, The answer will be in the Life data. ... I'd check fuel pressure first. It should be shown on your dash (AiM MXL2 has it, not sure about AiM MXL?), but it will de...

As Charley noted with the pin connector sometimes being a culprit, I had some problems with mine as the car aged. I converted it to a Deutsch style plug and: Solid connectivity with no accidental plu...