David Flynt

I tow my SR8 in a 20' F/L trailer as well. I use D-rings in the floor and secure them in both directions on the back hubs. I don't tie down my front hubs at all, and that's because the Radical dealer ...

I would have to agree with Charley on this one. I have been using the axle tie downs. 4 points into D-rings has been plenty sufficient for my car. I've been to the track many times in this configurati...

I'm not sure I would trust those tie downs. I would feel better if they were bolted down periodically or even better if some new D rings were installed further outboard. The method I have been using...

G'day David, I would agree with others here, that the best way to secure the car is using the D-Rings. I have used tie-down straps like the ones you have shown in your original post (although on a VW...

Race Ramps reinforces trailer ramps where the trailer door rests on the ramps and in flap cut-out areas. If you rest the trailer door or flap on unreinforced areas of the ramps you will almost certain...

People have been asking me what Race Ramps I use so I here is a link to the Ramps I have. I purchased them from Reverse Logic. You can also take measurements from the car and have a set custom mad...

Because Radicals only have about 1.5" of ground clearance it can be challenging to load them into trailers. Here is the method I used so that I could load and unload the car myself. I used a set of ...

I got tired of wrestling with the big half of the Race Ramps so I've stored them up in the ceiling of the trailer (I'm short, I don't hit my head ? ). Turns out that with the hitch I have in my fan ...