Erik Zabala Pastor

Hi there, Now i have filled the tank and the engine with oil and now it had 60psi of oil pressure as it should. However as i run the engine, the pressure started decreasing a bit as the oil started to...

Hi there! I have changed my oil for the first time today but i have the problem that i think there are some parts of the oil circuit that arent filling correctly. I cannot see the oil level in the sid...

Yes my engine is fuel injected. Thanks i will check that.

@davidf I don't find the parts available by My local distributor here in spain that's why I was asking if you knew some. Thank you

@lwsr3 How is that filter mounted and where?? I am trying to replace the filter in mine but i havent bee able to find it.

Thanks Rod, I finally took it out by heating a bit the lower arm, but it was quite tight. Anyway it came out (of course i removed the circlip before) and now i am in search of a suitable ball bearing.

And if you know if there are generic/industrial or so of this part would be also great

I am trying to replace the ball bearing in my front right lower wishbone as it has a lot of play and it should be replaced. However i am finding it quite hard, is that normal? Has anyone ever changed ...

Ok thanks, that was just to know and check engine vitals before running it on track or on a dyno test. I'm restoring nº253 I was planning to register it in the registry when we are done with it, I t...

Hi there, does anyone know where the ecu is originally mounted in a gen 1 sr3?

Hi there, I am restoring a sr3 gen 1 and I have seen it has a 992 MBE ECU, i wonder if it comes with data acquisition included or if I have to install a SOLO DL from aim or similar to have something.

Thank you very much Charley Ok i was missing The 2washers in between my pedal. By the way does someone know if the brake discs of a SR3 gen 1 are the same of any road car?

If you have how the brake pedal with the balance bar assembly it will be helpful also

Hi there! I am in the work of restoring a 2005 sr3 and i have problems with the brake balance, as I believe there is something missing. When i move the bake balance anything changes, the pedal doesn't...

@parsonsj Thank you very much!! I will take a look also on the carbotech pads