Rod Bender

@rjbender, I would defer this question to @RLM-Dan. He is a Radical engine expert and can better tell you how much sparkle is acceptable. All I can tell you for sure, is my hasn't had that much in i...

Update: I removed the engine this weekend and found the instructions in the Mechanics Manual to be quite complete. Below are my only additional suggestions: 1. Use a slide hammer to remove the engin...

That is what I thought. Someone told me is was very easy access without disassembly of whole upright, but was unclear if tackle from top or bottom. Axle joint packing is forthcoming after next weeke...

I'm sure my process isn't optimal, but here's what I did. I was removing my uprights at the time for replacement so my rotors are off, but that shouldn't be necessary here. Remove rear wheels Remove ...

Starting to get the hang of this monster. It's fun to be the fastest guy at the track 😀 Attachment : IMG_4557.jpg Attachment : IMG_4556.jpg

Beautiful trailer! You should definitely consult John Parsons on here that put motec on his SR8. I should surely think there is a good deal that will carry over, like the Jenvey setup. Excited to see...

So it is time for the old girl to get some upgrades after 200hrs of very reliable trackday fun and also as a reward to myself for the long hours of work over the past year due to covid. (12 mths ago)...

Thanks for the feedback. SR3 00846, and yes it has paddle shift. It may look like I'm pressing both pedals, but the ECU data doesn't support that hypothesis. Throttle input drops part-way when I l...

Hi Doug (@dbg), I am sorry to hear about your "off track excursion". Are you alright? A few pieces of information would be helpful in diagnosing what went wrong. What chassis number is your car? J...

Posted by: @lunatic @charleyhradicalsportscarregistry-com i know that about sidepods.. but the sideskirts.. they are much wider underneeth.. looks like they are pushing air away from the rear wheel?...

Hi i have some Parts for Sale, 4x 280mm Brake Discs new 900.- 8x Brake Pads new 340.- complete Compressor With airtank, Sensors... overhauled inlet 550 sold 1 Radical Dash 250.- 1 Motec Beacon Receive...

I have cut open a lot of filters and I have never found anything close to this amount of debris. I would definitely send the engine to Spring Mountain (RLM if you were in the U.K.) for overhaul. In m...

Also, it looks like you used some type of cutter to open the filter. I have had great luck with the Longacre filter cutter. It opens the filter like a can opener. It isn't cheap, but it is a high q...

@ajiman, getting your oil tested regularly is a good practice. I get my oil tested at every oil change to track the changes. Also when tracking hours you should be tracking total engine run time, no...

Well progress was definitely stalled for the month of July and that ran into August as well. I have been doing a lot of cleaning, selling old car parts, ect... to make room to work on the car. However...