Wouldn't this be the same connector that is used on the SR3's with MBE ECUs?

Yes, I was going to suggest Spring Mountain also. It is amazing how many parts they have in stock. I was talking to them yesterday and they were tel...

This is likely a part / tool that is best purchased from your local Radical dealer. Charley

Nikolay, Another thing that could be affecting the blippers ability to function properly is your throttle cable. It could be out of adjustment and no...

Great advice from Brandon. Charley

Hi Nikolay! This sounds like it could be a blipper issue (because you are hearing the pneumatics, but it wont downshift under load) Did you check the...

Here are a couple of pictures of what the charging / jumper leads look like with the Anderson connector.

Oh, lithium to AGM...got it. Putting it in the cockpit would work also. When people have the batteries in the side pods they often use a short jum...

Brandon, I believe that is the Reverse switch. It should have a Green/Black wire and a Brown/Yellow wire. To the best of my knowledge this just oper...

If you are going to relocate your battery I would look at putting it behind the left side pod like on the 24v SR3’s. You may have to move it forward ...

Here is a good picture showing the bolt locations on the RSX. Charley

Congratulations on getting your car out on the track! It looks like you had a great day. What kind of camera do you have? It is very clear and it g...

I updated one of my previous posts to include pictures of the three styles of blippers. Charley

Those look like the right ones. Here is a picture of an RS diffuser showing where the mounting locations are. They will be different on your RSX, bu...