Dan Phillips
Dan Phillips
@rlm-dan
Reputable Member
Joined: November 13, 2018 1:25 pm
Last seen: August 29, 2026 11:02 am
Topics: 7 / Replies: 297
Reply
RE: Voltage rectifier/regulator access

I think it is a case of removing/loosening the side pod to get to it unfortunately. In addition to what has been said above the fuse/fuse holder in th...

8 years ago
Reply
RE: Bikesports Championship 2019 schedule

Testing tomorrow for a few of the teams and then race day Monday. The races will be streamed live and can be found by following this link: First rac...

8 years ago
Reply
RE: Blipper Shifter Diagnosistic

Hi Brandon, Actuator is the correct side of the gear lever which is good. With regards to the setting of 166mm this is with the actuator bolted to the...

8 years ago
Reply
RE: Blipper Shifter Diagnosistic

Brandon, another thought, have you checked the actuator setting? This is important to ensure it moves the same amount either way and with you fitting ...

8 years ago
Reply
RE: Blipper Shifter Diagnosistic

Hi Brandon, I cannot tell from the pictures as they are too small, the actuator needs to bolt on the outside (towards left rear wheel) of your new gea...

8 years ago
Reply
RE: CNC Uprights

Would be interesting for Hans to confirm, I am guessing they want the ability for more adjustment. Slightly sidelined but did you get sorted with body...

8 years ago
Reply
RE: Bikesports Championship 2019 schedule

Shaping up to be a good one with the first round in a couple of weeks (Easter weekend). I will update with some info and pictures as it happens.

8 years ago
Reply
RE: CNC Uprights

Are they not camber shims?

8 years ago
Reply
RE: Crash Damaged SR1 Rebuild + Upgrade

Thanks Charley, we have just made it through engine wise. We know have a few solid weeks of dynos to set engines up, certainly keeps us busy. Spent th...

8 years ago
Reply
RE: Bikesports Championship 2019 schedule

RLM Sponsored this year and we are really looking forward to it. Should have some decent grid numbers!

8 years ago
Reply
RE: Crash Damaged SR1 Rebuild + Upgrade

Sorry I have been so slow to update, progress on the car has slowed considerably lately. With start of the season rapidly approaching and 30 odd engin...

8 years ago
Reply
RE: Hi - SR1 Project

Hi Charlie, Last one we did was a couple of years ago and we had no problem with parts, they just took a couple of weeks to arrive. I have just had a ...

8 years ago
Reply
RE: Engine Run Time from Life ECU

Oil Pre-Heaters are Wolverine so should be available in 110V. On load time is above 3000rpm but also 25% throttle, every time you are below that (on t...

8 years ago
Reply
RE: gearshift compressor / blipper question SR8

Glad you got it sorted, your car is as Charley said. An earlier version where the blipper is always supplied with air and an electronic signal activat...

8 years ago
Reply
8 years ago
Page 19 / 21