Victor Ling

Wow David, this is an amazing setup. Thanks for detailing this all out for the community. Having the right equipment makes all the difference. Is there a way to use the camber gauge without the set...

Sent you a PM

Confirmed the bearing did fail. Tons of loose metal inside. I’ll be ordering a new engine as the lead time is 5-6 weeks vs rebuild which is 3-4 months. I suspect the rebuild cost could exceed the c...

@raider89, Spring Mtn also makes a screen that you attach to the underside of the louvers. I can't recall the cost, but they are not expensive.

Yes, the wheel wells develop high pressure and the vents are there to relieve it to better allow the underbody to do it's work generating downforce. Same vents can be found on the GT3RS, GT2RS, and G...

The car is at the shop so I can't get a measurement today. The engine is coming out and we are going to open the case to see how much damage there is. If we somehow got lucky then maybe we can fix i...

Dan, thanks for the input. Wow much worse than I expected. I attached pics of the rod. Engine is a 1340cc. 50 hrs total, 30 on load hrs. Was new in May of 2020. Attachment : 79286F3E-E06D-4...

My engine had a bearing seizure yesterday. The clutch pack does not move. I am told this is a common failure. Also I was told the bearing is integrated into the case and requires a rebuild to fix. ...

That's great! My 2 day fedex appears to have gotten lost in Memphis so I ordered another set today.

These mid cycle improvements are more significant than the RSX to XX changes.

@davidf From the picture these look more like the ones that came off the car. The ID measurements are much closer too. I will order some and give it a shot. Thanks!

I am having trouble matching the correct size. Looks exactly like the washer on the right in Dan's picture above. The outer diameter matches a 1/2 BSP, but the dimensions of the rubber part as well ...

That stock muffler is tiny. Must be the “loud” muffler option?

My Radical has Aurora rod ends on it. Not sure if they are original or not. Radical is supplying NMB. Price difference is huge. From what I can tell, both are heavy duty and made for suspension us...

Posted by: @davidf The bleeder valves for brakes is 10mm and the clutch is 8mm. Brakes can be bled with a short wrench, but the clutch valve is in a very confined area. I bought a specialty wrench ...