CharleyH .

I found the manufacturer of these, Bailcast, part number UB414. Found some on ebay out of the UK. $25 and free shipping

Exactly what I’ve been doing - downloading and reading. i appreciate the offer - expect calls. Lol

Here are some recent photos. I've been heads-down with wires, connectors, and sheathing for several weeks. The wheel speed sensors are nearly a bolt-in (I had to turn the hubs about 0.2mm to get a pro...

Thanks! Will get a post up in the SR1 section shortly.

The tank in an SR1, Aluminium, foam filled 54L fuel tank Attachment : IMG_0383.JPG

Nikki Do you offer track days at The Ring as well? I emailed you separately on this.

I have the kevlar louvers. The fibreglass ones shred easily. The kevlar ones are great, though I had the shop do a mod where they put deer wire underneath to stop stones and clack from blowing through...

Wow what a cool car...I could see this having a collector value in the future. Did he race in any of the series?

The fuel pump is back in the car, and I tested the low fuel warning "system" (aka light, 🙂 ). Works great. It might just be a bit too late... the warning comes on with about a liter left. Hopefully, a...

What will be cool is if I can run this Alarm through the ECU, and get it on the CAN bus along with the fuel consumption number. Then I can put it all on the dash display, rather than have a separate l...

Over the past couple of days, I've been getting my fuel pump ready to go back in the car. One of the things I find most annoying about my SR8 is the lack of a fuel gauge. My understanding is that even...

Jenvey wanted me to change the design of the DBW -- they didn't like how I'd made the actuator driver the throttle directly, rather than through a linkage. I'm a big believer in learning from experts,...

While I wait for some final parts on the DBW actuator, I've turned my attention to the PWM control of the fuel pump. The OEM design is to use a return line with a mechanical regulator, and while it's ...

i emailed them about some parts but they never replied

The Performer is powered by a GSXR 1000 engine, quiet similar to a SR3 but without a diff and without a suspension. In a way a hybrid between a superkart and a car. It weighs only about 290kg with abo...