CharleyH .

It is OEM Suzuki, providing it is long stroke which it should be with that chassis number. Any Suzuki dealer can supply it or give RLM Racing a shout who have them in stock.

@charleyhradicalsportscarregistry-com 🍺 Cheers! Worked a treat, thank you.

@tertre-rouge .. G'day James... this is a well worn question. See the thread below and take particular notice of the need to 'prime' the pump circuit (probably mainly the pump suction line) before yo...

I use this bought from ebay fluorescent colours

Josh, I've got a refurbished Stack dash from my 2009 SR8 with a new battery. Let me know if you have any interest. @meatman

I watch car sales on BAT regularly. I see crazy numbers for low production, certain model production cars. Race cars on the other hand do not have high values. Some of the prices were crazy low. I...

We've been running various cars on the C72 compound for the past 2 years. They are great on particularly cold days as they warm up (almost) instantly compared to C52's... We run them on rental cars wh...

@charleyhradicalsportscarregistry-com Fantastic on all fronts, that manual has all the missing torque settings I've been hunting around for and a discount is always appreciated! Thank you.

Less than 5 hours to go! Ends at 1:55PM ET!

I had a gps problem with my 2021 SR3XX. I called AiM and they asked me to send in the smartycam and the GPS, which were tested and they determined that the GPS was faulty. It was sent back to Italy ...

Get your bidding paddles ready! Very fresh turnkey car ready to go on track!

@tmpoquette It is actually quite common for AN rubber fuel lines to fail. Modern fuels will eat up rubber-based hose, especially ordinary AN hose. I wrote an article for Chevy Maxx magazine about this...

All of the service and pre-race items are well described in the manual, and frankly although there are many thoughtful and experienced members on this forum, when it comes to car prep it is best to fo...

@rojid I understand. When it comes to torque, using a measuring device and the correct torque spec is far more accurate than "by feel" and descriptions such as "barely snug", "snug", "tight", etc. ...

That's awesome to have the factory engaged!