CharleyH .

You are not running a Life system. As you say it is an MBE ECU but your paddleshift is controlled by a Geartronics unit. You need the Geartronics software and a USB lead to connect, with this you can ...

This year was pretty unremarkable -- I lost the clutch my first weekend in January, but after I replaced it all was well the rest of the spring. The car has a new Radical engine, and new Kinsler DBW t...

Back at oulton park for a proper go, after the first time was cut short with my rectifier blowing. Track was fully wet all morning then finally the intermittent showers stopped, the clouds broke, and...

Current quickest lap I've managed at our local track. Still figuring out the best way to use the brakes in some of the technical sections. Turn 1 might be flat out, but mentally feels like a big ask.O...

here's my first ever drive in my car at Donington UK. 6 months in the making! unfortunately this was the only (and i literally mean that) clear lap out of 78..... driving these cars on a general track...

I would say I have been rather successful in this rebuild. Started up just fine runs fine and cycles through the gears just fine. On Sunday I plan to blast up the street to see how it is under load ...

@bluefunelement I go for the spray bottle as I just feel its more value for money. Spray on and leave for 10/15 mins then going over with a cloth spreading it out, removing excess and working it into...

I don't run cars so not the best person to answer this but personally I would be going over the car with ACF50. Its a water replant that protects from corrosion etc. The only thing to avoid with this...

I remove the parts and clean them up but still have some air leak. Ask Group A racing thinking might need some replacement parts. Group A racing is the best by far. They asked the factory for me an...

As mentioned this is normal, due to the design of the gearbox. The gears all have 'dogs' on which engage with each other as you shift gear. This all works well as the gears and shafts are all spinning...

I have 2 sets available again, each set has 3 sessions on them.

Great info. I just want to re-emphasize that if/when you replace the TPS sensor, be sure not to over-tighten it. Just snug or barely snug. I learned this two weeks ago from dealers and Radical tech...

Hi Dan, Sean here from Spring Mountain Racing. Are you able to send us over the Life data so we can take a look at this so we can help solve the issue you're having with the vehicle shifting incorrect...

The ratios are the same in the even in the updated engine - standard Hayabusa. That sounds to me like it is jumping out of gear under high load which is very strange to see. Feel free to send me over ...

Some additional clarifications: this was an intermittent issue/concern. I ran 4 sessions, it occurred in 2nd, 3rd, and 4th sessions, a couple times each. Each session has approx ~10 laps. In those...