David Flynt

Radical has been studying the gear wear issues in the SR3 Gear Drive Unit (GDU) and released an upgrade kit to help resolve the issues. Take a look at it and make sure to upgrade your GDU at the next...

Charley, yes I recall talking to you before I purchased the car about the difference in the Life Integrated shifting vs Geartronics. Yes that makes sense about the battery replacement. So that 89 ho...

Hi @nautoncall, I can add a little bit to David's excellent response. The Life Racing ECU has a battery that only gets recharged when the engine is running. People often mistakenly assume that if the...

@davidf Thanks David. I spoke with James a Radical in the UK yesterday. He told me they were phasing out the original uprights. The billet ones were designed because of safety concerns for the SR10. H...

Im measuring and adjusting camber on my SR3 XX for first time. The question is for folks who have done this before. To adjust camber do I adjust bolt #1 or do I disconnect and adjust the adaptor #2?...

I had always driven race cars with a traditional manual/clutch, so I was a right foot braker. This summer I switched to a car with a SaDEV sequential and started learning to left foot brake. I'm sti...

I use the TPMS kit from TrailBrake.com. No leaks, 3 sets of sensors. I've incorporated the pressure and temp data into my AiM configurations, and send it via CAN to the ECUMaster PMU and MoTeC ECU. My...

@speedsmith, Congratulations on the new car! There are several ways to tackle this but your approach looks pretty good. Many shops fabricate a "C" shaped piece of metal and bolt it to the pedal vert...

Im considering installing the TPMS sensors for tire pressure and temp monitoring. Does anyone use these? Can you give me some feedback if the data is meaningful and worth the expense? Thanks

Very much agree with David on the TPMS sensors... We've had two demo cars with these fitted and only ever used it to "confirm" they are working... The only benefit I could see to these is if you are w...

@DavidF David, I think I just bought out Belmetric across a number of sizes and lengths. I am now guaranteed that even though I have purchased a wide assortment of bolts, washers, and nuts I will fin...

David, thank you, that is a fantastic list. Re: Car, I have a 2022 SR3 XX, was produced just before they made the switch to the SR3 XXR. Will get to ordering the parts above Kevin

@davidf Thanks very much for all that info. I think I've got a decent brake shape, but my goals this year are to add more trail-braking and to move my brake points deeper. I've always felt just a bit ...

@davidf David, that's a great list of suppliers, tools, and hardware. I have nothing to add, other than to extol the virtues of Milwaukee 12v (not the 18v stuff, they are too big!) tools, including th...

@davidf … G’day David, I’ve now made some adjustable pushrods for the rear of my RSX, so now both cars have them. My setup is now ‘normally’ done using the pushrods to adjust height/weight… but i try...