Graeme Davies

The Asian formula coolant is pink, 20/80%, then add some Water Wetter. Looks just like water plus Water Wetter if anyone looks in the reservoir.

Ordered them through Chris at Spring Mountain. Normal stock order. The factory supplied the part numbers.

Update, parts have been ordered. There is a newer style pin/axle that will need to be welded in place. I should have the parts before the end of the month. Then just put it back together.

I am a little worried that parts might be an issue. Worst case I could have a machine shop make some from hardened tool steel.

I agree on the conservative approach, as I am the director of maintenance for a group of private jets. But if the root cause is say the positioning of the 3 gears that failed, then a new part will fai...

Lucky I never used reverse! I always pushed the car by hand to turn it around in the garage. The planetary gears where held in by the remnants of the axles and grease. As long as reverse is not sel...

So, I have had a rubbing noise that happened intermittently on deceleration. It would instantly go away if I touched the clutch or the throttle. Looked at all the brakes and drive shafts sprocket and ...

I have a similar winch setup. So far I just charge the battery after the weekend. I do plan on wiring the battery into the trailer so that it can be charged and run the interior lights. One of my conc...

I center my strings using a similar point on the chassis side to side at the front, then at the back. Then go back and forth until it's perfect. Effectively, to the center of the car. The problem with...

My SR1 is a manual car, I like it. a paddle shift car will be a little faster, and better on the gearbox. With the manual you have to heel/toe the downshift. Not too difficult, and it keeps you eng...

Great progress! Looks well done. On your coil dwell, it is important to get the dwell setting right, as it is the amount of time the coil needs to charge prior to firing. Too long and the coil can ov...

There are two plastic anchor points on the crash structure, I use them for my string bar, they line up perfectly. I'm am pretty sure that's what they are for. Attachment : IMG_0538.JPG

I bought mine from Radical

Posted by: Richard Kosar Tell me more about the halo, please. I see them in a couple of the pix above. Is that a bolt in piece that goes where the little head rest thing is? Does it interfer with a ...

Just thought I would share the video from the final race of the season. It is my best drive to date, with my lowest lap time. I made a mistake on the opening lap, but managed to recover on lap 6. Th...