As the title says, who's using what for coolant?
I had a pin hole in a radiator and after repairing am wondering what is suggested for coolant. Are we going down that "racing" road and purchasing "high performance" coolant, are we using Water Wetter or what about just putting good old Prestone (or any brand name, aluminum safe) coolant in the system?
Thoughts & comments appreciated.
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming 'WOW-What a Ride!'"
I seem to pull motor on a too frequent basis so usually go back with DI water and a splash of automotive enough coolant to make it have some green in it for some modicum of protection. The motorcycle folks particularly dislike coolant leaks on track.
Turning money into smoke and noise since 2005
The Asian formula coolant is pink, 20/80%, then add some Water Wetter. Looks just like water plus Water Wetter if anyone looks in the reservoir.
Thanks for the suggestions. I went with a bottle of Lucas Ice and water. Man, the system's hard to bleed.
"Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming 'WOW-What a Ride!'"
I use water and water wetter. For the record...
I use Ravenol C13.
