Larry Webster

Thanks Charley. Makes total sense. The timing part is the issue. By the time I get it somewhere, they fix it, and send it back and I put it back in the car, the season will be over. Sigh.....

Hi, my 2003 SR3, which has the manual shifter, does not consistently downshift. It upshifts perfectly, but when engaging the lever to downshift, it feels like there is an obstruction. I can not find o...

Thanks. Let's hope the gears are okay. Will check. Does anyone have a preferrred source for the starter motors? They seem to be about 100 bucks.

I can confirm that a spin can kill the starter. I was at Mid Ohio this past week and a guy hit a groundhog, which crushed his oil cooler. I spun in the oil, didn't get clutch in quick enough, and abs...

@rjbender The car would not accelerate past 5000 rpm. The devil was that in the pits, the car felt fine, it revved up, and felt fine idling around the access roads. Once I got on the track, the engine...

Hey Folks, Sharing some learnings here: My 1500cc SR3 had fuel delivery problems from a clogged fuel filter and the screens in the injectors. It's not clear if the cause was from my car sitting for ye...

Hey thanks Charlie. Okay, I have to eat some humble pie here.... I got under there once again to make sure I had the right dimensions. And then while playing around that if I put the rod on the other ...

Thank you. Didn’t see that. Yeah I could see changing the pivot on the shift rod in the cockpit. I have a bell crank that bolts to the firewall with positions above and below the pivot. My issue is th...

Hi, I’m reversing the shifting direction so pullingthe lever rearward is an upshift. Unfortunately, moving the shift rod to above the bell crank means that the rod hits the engine. There are several ...

Oh boy do I now have a couple of mixed feelings. First off DUMB ME, once I waited long enough for the engine to get warm, the gauges came on!! It was 57 degrees for both water and oil temp. So I’m re...

Thank you both! I appreciate the guidance. I will email you. larry

Hi, I’m a week from my first track day with the car and the temp gauges are not working. Actually, the dash display is acting weird. Yesterday, the water gauge worked, but not the oil temp until I cy...

Hey I opened my muffler to check the packing and possibly repacking it. This is what it looks like. Are there pieces missing inside? How does one add the packing? I need it quieter for the local Water...

I will do so tonight. Thanks for the information.

I will do so tonight. Thanks for the information.