Josh Spray

Posted by: @rlm-dan Josh, you mentioned that your engine is 1340cc K8 but that looks like a Gen 1 engine to me, although I would need to see more photos to be sure. Apparently gen 1s start with w70...

My clutch was rattling around and since my trans is out I will replacing the clutch, clutch basket and springs. Anyone have a kit that can recommend to me?

I am looking to buy a set of 3.594:1 or 3.409:1 gears. Please let me know what you have asap!

@charleyhradicalsportscarregistry-com The engine hour meter says 39hrs, I have no idea on the who did what when except what I was told by Radical Canada West and even that was vague. I was also p...

Posted by: @rlm-dan Josh, you mentioned that your engine is 1340cc K8 but that looks like a Gen 1 engine to me, although I would need to see more photos to be sure. There is a chance that it could be...

So I have a tooth broken on the final drive gearset, a tooth broken on the gdu gears, not sure which yet as I have to buy the sockets to remove the final drive gears to get to that one allen key behin...

Well damn..... Attachment : PXL_20220702_034751387.jpg Attachment : PXL_20220702_034758425.jpg

First find..... Also won't shift higher than 4th gear... Attachment : PXL_20220702_025753066.jpg Attachment : PXL_20220702_025804535.jpg

Posted by: @davidf What car model and year? Does your car have a Quaife GDU? Check axles, engine output drive shaft, GDU input drive shaft, the couplers that couple the engine drive shaft to the GD...

I was at a track day today, first session on the 3rd lap turning right into a hairpin, just as I got on power "bang" and instant spin 1/2 way through the turn. After that I had no drive, car wouldn't ...

Cool, thanks for the info!

Typically the time between sessions is about 90 minutes. Would you recommend keeping them at 180 for that long? If not how long do you think I should allow to get them back up to temperature before...

@gwt561324 Do you keep your tires at the 180 Fahrenheit the entire time between sessions?

Posted by: @davidf Consult your owner's manual for preload setting and chassis setup procedure. On my car, we adjust the preload to +4 turns from zero (without wheels mounted) on the front, and ze...

I went to AVO's website looking for information on these shocks on my SR3 but there is no radical specific listings. I'm wondering if the fronts are adjustable, by the Allen key on the bottom perha...