Russ McBride

Bump. Still interested in buying a gear set for low speed events (like autocross, hill climbs). Best contact is via email, please - russmcb@bellsouth.net Thanks.

I've decided to do lower speed events, so I'm looking for a set with a gear ratio higher than what I have now, which is 3.071:1 (35/43). So, I could use (in order of preference): 3.594:1 (32/46)* 3.40...

Posted by: @charleyhradicalsportscarregistry-com Russ(@russmcb), Here is a picture of the clutch slave cylinder on an SR3. Hope this helps, Charley by: @graemed paragraph 11 Fantastic. Than...

@graemed, thank you. Saw your pictures. Very informative. I had to do something similar (extra spacing) when I had a chain drive Quaife. However, with the new SR3 GDU, I've lost a lot of room in t...

I am installing an SR3 GDU in my formula car/Hayabusa. It is taking up more room near the sprocket area, so I'm not able to use my current slave cylinder. I'd like to see what the SR3's slave cylinder...

My hunch is you'd need to buy the pump from Radical. It will likely have the inlets and outlets. You'll also need to replace two of the GDU's plugs with fittings, so you can get oil out of the bottom...

Posted by: @charleyhradicalsportscarregistry-com Posted by: @russmcb Sold! Thank you, RSR. I a, glad to hear that the deal went through. That worked out perfectly for Jeff’s application, so it i...

Sold! Thank you, RSR.

If you decide to do more autocrossing, it should be fairly easy to add an electric fan, mounted on the radiator (heat exchanger). I haven't researched that for your particular application, but general...

@crit Make me an offer. You could put these in your car in maybe 30-45 minutes and tear up the course! 🙂

Sold 12/16/2019 I think these are new. They came with box of Quaife parts I purchased last year. I can't see any evidence of use. I read here elsewhere a new set is $600+. I'll sell for much less....

Yes, thanks, Charley. Very helpful. My spare set (which appears to be new, unused, and I would be happy to sell), is the lowest set - 3.594:1 So, probably not what Manny is looking for. I guess tho...

Manny, there is a slight chance I have them. I got a box of Quaife parts last year. I haven't gotten around to seeing exactly what I have yet. Is there a schematic somewhere on the internet that sho...

Posted by: @charleyhradicalsportscarregistry-com @russmcb Could it be an issue with the pump drive not going all of the way into the slot?? Charley No, because even my non-pump plate (just the plain...

I'm near Atlanta, GA. Primal Racing (Radical dealer) is at Atlanta Motorsports Park, about an hour north. I've contacted them and may visit them this week. Your picture helped me get past one of my ...