Last seen: March 1, 2024 10:16 pm
Ron, I'll try to put together a drawing sometime this week if that works. Martin
I did look at the wiring diagram so really appreciate you posting that. It looks like I was correct. The fuse appears to be 30amp. After replacing ...
Here's what I did.
Great video, should help many new owners out. Now if we could only find an alternate source for those pricey nuts! 🙂
m roj, Ben Jacobs has a set of pedal extensions that should help out. They came with his car and he doesn't need them. You might message him. I've...
Nice driving! Hopefully someone will have advice on the mic. Thanks for posting, good to see someone is getting track time.
Dan, I normally use the backplate as a guide as it's 5mm. If any part of the pad is less then the thickness of the back plate I replace them. Like ...
Really nice looking car! NCM is one of my favorite tracks, so much going on. Haven't been there in a Radical. That's really going to be a blast!
Really glad to see this! Congratulations Charley! Not sure I would have taken this path without your input and advice. Thanks for all the help o...
Rich, I'm from Wisconsin and run at least a couple of times a year at Gingerman. This past season I spoke to someone that said there is a small group...
Brian, Since no one has commented, I thought I'd try and help you out a little. Charley may offer some advice too but RXC Spyder's and SR10's are p...
m roj, common practice (from Radical) is to use a 4"x6"x8' piece of lumber to support the car. People also use a jack stands to support the car in th...
I put the sand bags on top of the car just behind the crash structure. Between the front tires. No problem on the measurements. Let me take some n...