Hello out there, does anyone have the dash programming software for the radical dash as fitted in my SR4?
I have changed the front sprocket from a 16 tooth to a 15 tooth and now the gear indicator doesn't work because of the change of ratio. (Hillclimb & Sprint Use)
Unfortunately I did not get any software or programming leads when I purchased the car. Any help greatly appreciated 🙂
Hi Dominic (@dombishop), no software is needed. I have never tried it on an SR4 but there are instruction on page 6 of the SR3 (First Gen) owners manual in the Registry Resource Library and it explains how to adjust the dash for the different gear ratios. Here is a link: https://radicalsportscarregistry.com/sr3-gen-1-2002-to-2008-owners-handbook/ .
Hopefully the same method will work on the SR4.
Many thanks CharleyH, I will give that a go, in my SR4 Manual that complete section is not included as the ratios are changed by replacing the front chain sprocket and or the rear chain sprocket. Worth a try. My ratio is 3.13:1 with a 15 tooth front to a 47 tooth rear so the nearest would be the 3.071:1 ratio and is only 0.059:1 out. 🙂