Notifications
Clear all
General Discussion
2
Posts
2
Users
0
Reactions
182
Views
Topic starter
May 11, 2026 7:15 pm
Hey hey,
I have replaced my lower control arm and both heim joints and was curious on your opinion on if it appears the upright might be too tight even if it was torqued to specs.
June 16, 2026 4:57 am
If everything is torqued to spec and the suspension still moves freely through its travel, I wouldn’t worry too much. New heims can feel a bit stiffer than worn ones at first. Might be worth cycling it a few times and checking for any binding at full droop or compression just to be safe.