New member and new owner of an SR3 SL
Hello everyone,
I'm Matt, A lot of good information on here so thought I'd join up, Already spoken to a few Radical owners here in the UK and they have been super helpful along the way.
I'm the owner of chassis #88, Gen1 yellow road legal supersport bought on pistonheads auctions last year with very poor wiring, blocked fuel pressure regulator, damaged plug leads and bodywork issues. Since then I've installed a forged 1300cc engine, C30-94 supercharger, suspension, new ECU, loom, renewed bushes bearings bolts etc.. I've got a gen2 RS bodywork (although I'm now thinking to go RSX bodywork)
Still a work in progress and lots left to do but hoping to have it finished for the summer.
looking forward to the first drive, then possibly look into something like hill climb or time attack in the near future.
Cheers,
Hi Matt (@matt), Welcome to the Registry and congratulations on getting your car. I am looking forward to following your progress on your car. Post some pictures when you have a chance.
Thanks Charley, We had a brief chat through email when I first got the car but most of it has changed since then 🙂
I will maybe add a build thread on here sometime. Cheers
Hi Matt, what’s the latest on your build?
I’m very interested and would like to do the same to a gen 1 sr3 as well.
@bbutler Hi Robert, it’s been slow progress lately with other house projects ongoing. But engine is in, AIM PDM32 in and wired etc.
Ive got to make all the brackets, dash mount, Chargecooler hoses etc.. now which I feel takes the longest.
im waiting for the body to be painted, my painter keeps putting it back, I ended up going RSX body. Once that painted I’ll get everything plumbed up and hopefully get it running
you considering supercharging ? Or newer bodywork ?
@matt hi again Matt, I’m very interested in the supercharger upgrade only. Myself and another sr3 owner are. Thanks for the speedy reply. We are both can do guys and can benefit from your experience immensely. Thanks for sharing any information. I’ll send you some crawfish!
sounds good. If there is anything specific what you need to know I’m happy to help.
My charger setup is a C30-94 gen2, it bolts direct to the stater cover so there is no belt. I have seen other kits that puts the charger offset then uses a belt, probably a batter way then at least you can regulate boost with different pullies.
I made my own Chargecooler intake manifold. The Chargecooler radiator I’ve used is a radical SR8 right side radiator.
if your on a gen1 body the radiators are smaller so that wouldn’t work but I’ve got a used smaller radiator you could put in the drivers side if you went that route. Otherwise get an intercooler in there somewhere.
the charger has an internal oil pump and needs to go through a cooler too so I’ve put that inside the left pod in front of the engine water radiator.
some bigger injectors are needed, depending on what power your aiming for I have a spare set of siemen deka V 630cc.
Will also need a fuel rail with a return to the tank and a fuel pressure regulator and uprated fuel pump.
I installed a vacuum tank to get a steady MAP signal.
im hoping for 330-350bhp which I think should be achievable.



