Bill Snead

@ntf3000 thank you

@parsonsj Thanks John!

Hello- Anyone have a recommendation on a good brand of tie down ratchet straps? So many out there. I will be using the hub tie down locations. Thanks!

Hello- Wondering if there are any RXC Coup/Spyder owners local in the So. California area? Would be nice to have a contact to discuss issues or meet up. I have an RXC Spyder V8, registered for road us...

Thanks Charley for the insight. A lot to consider for sure.

@darrahc thanks Clark. You somewhat validate my concern. If I load front first, it probably won't tilt back down which would be a major pain. Idea to add some weight to the front of the trailer but t...

Hello- I'm looking for a small trailer for my RXC Spyder. Found an aluminum 14ft tilt, single axle. The bed is 14'2". I was going to use long race ramps to get a lower angle. The car is raised for str...

John, you need to drive the SR10 and write up a real world comparison!

Congrats Clark! You should be killing anything on the track with that 10. Curious how it would compare to the SR8. Keep us updated!

I have reached out to Radical UK directly, also going to talk with Team Stadale. I will take some photos shortly, thank you.

Thank you John. Yes checked the coolant, nothing noted there. I was advised maybe the oil pump was not scavenging properly. Do you know if it is an engine out job to replace the oil pump?

Hello All- Getting the oil level correct seems to be quite a process! Now another issue. So I set the level as required, warm motor to over 60c, hold at 4K RPM for 5 seconds to scavenge, turn off and ...

Hello all- I have been a lurker for awhile, thought I would register officially. I purchased an RXC Spyder V8 (serial #00015) last year from Team Stradale. Have basically been going through the car, m...