CharleyH .

Dang! Looks like you guys had a blast.

Posted by: CharleyH I know you were trying to get it as quiet as possible... but not using fuel is going a bit too far ? But it did allow me to get past the sound check point without even a side gl...

The new seat insert has made a world of difference. I'm comfortable, feel well held and am able to steer the wheel instead of hanging on to it. I will probably end up pouring another, now that I und...

The Penske 7500 double adjustable dampers are being built. I ordered them about the same length as the Gen2 SR1. This will allow the Hankook to be used, if desired. The gen 1 dampers are 305mm front a...

I considered both ways but decided to keep the pad in for more elevation. Without the pad my vision was back below the dash. It fits into the pad really well.

Thanks Charlie , well said

Are the Michelin's and Dunlop's radials? I am running Hoosier bias ply slicks.

Yup, that's what I'm thinking about doing - and you are correct, both of my pipes have a rolled lip on the ends - easy enough to fix, as I've been fabricating stuff like that (and full vehicles) for y...

Hello All, My name is Alessandro and I run Monza Garage, it is about 17 years we deal with the brand in Italy. Thanks to Charly for the presentation: we will soon post our 2019 track day calendar. If ...

I have a similar winch setup. So far I just charge the battery after the weekend. I do plan on wiring the battery into the trailer so that it can be charged and run the interior lights. One of my conc...

Your front weights look great but your cross weight is 52% way off. You want to: 1-make sure you have a flat floor use bucket of water trick 2-disconnect sways 3-tires to hot pressure 4-alignment s...

There are two plastic anchor points on the crash structure, I use them for my string bar, they line up perfectly. I'm am pretty sure that's what they are for. Attachment : IMG_0538.JPG

Posted by: CharleyH His is a great project. I am enjoying following your progress. How did you arrange to have Radical repair your frame? Charley Charley, We were very lucky, when talking with Radic...

Continuing on we have the engine new rebuilt to an RLM 'Stage 2' 1440cc spec. I will put another reply up with engine rebuild photos. Engine has been installed and the rebuild continued. We have had t...

The car is now coming back to life. I've got all the lights, brakes, and turn signals working again (I rewired the chassis harness and removed a lot of unused wires as part of this). The M1 has power...