This user account status is Approved

Forum Replies Created

RE: Looking for MBE USB/CAN cable

This is likely a part / tool that is best purchased from your local Radical dealer. Charley

In forum General Discussion

7 years ago
RE: Blipper Shifter Diagnosistic

Nikolay, Another thing that could be affecting the blippers ability to function properly is your throttle cable. It could be out of adjustment and not letting the blipper blip the throttle enough to ...

In forum SR3 Specific Discussions

7 years ago
RE: Blipper Shifter Diagnosistic

Posted by: Brandon Fosbinder Nikolay - in my case, the shift never initiated because the wiring harness was clearly torn. In your case, and Charley will probably add in, I think yours sounds like a p...

In forum SR3 Specific Discussions

7 years ago
RE: Blipper Shifter Diagnosistic

Hi Nikolay! This sounds like it could be a blipper issue (because you are hearing the pneumatics, but it wont downshift under load) Did you check the blipper wires as we discussed? Also you can have...

In forum SR3 Specific Discussions

7 years ago
RE: What battery are you using?

Here are a couple of pictures of what the charging / jumper leads look like with the Anderson connector. Attachment : Single battery.JPG Attachment : 938 2.jpg

In forum Prosport / PR6 / Clubsport Specific Discussions

7 years ago
RE: What battery are you using?

Oh, lithium to AGM...got it. Putting it in the cockpit would work also. When people have the batteries in the side pods they often use a short jumper with an Anderson coupler to jump the battery i...

In forum Prosport / PR6 / Clubsport Specific Discussions

7 years ago
RE: Random (to me) plugs on GDU

Brandon, I believe that is the Reverse switch. It should have a Green/Black wire and a Brown/Yellow wire. To the best of my knowledge this just operates "Back up lights". Here are a few graphics th...

In forum SR3 Specific Discussions

7 years ago
RE: What battery are you using?

If you are going to relocate your battery I would look at putting it behind the left side pod like on the 24v SR3’s. You may have to move it forward more to clear the air inlet? Also, you mentioned ...

In forum Prosport / PR6 / Clubsport Specific Discussions

7 years ago
RE: Removing rear diffuser

Here is a good picture showing the bolt locations on the RSX. Attachment : 1177-13m2.jpg Charley

In forum General Discussion

7 years ago
RE: First track day in SR4

Congratulations on getting your car out on the track! It looks like you had a great day. What kind of camera do you have? It is very clear and it gives a good perspective. Many POV cameras have su...

In forum New Member Introductions

7 years ago
RE: Blipper Shifter Diagnosistic

Posted by: CharleyH To help visualize the difference between the different blippers. The first version of the blipper system used trigger wires going directly to the pneumatic throttle blipper (as sh...

In forum SR3 Specific Discussions

7 years ago
RE: Removing rear diffuser

Those look like the right ones. Here is a picture of an RS diffuser showing where the mounting locations are. They will be different on your RSX, but they should be similar. The front edge of the d...

In forum General Discussion

7 years ago
RE: Prosport 1000 D-Sport Order Form Added to Resource Library

I thought it was interesting also. I normally remove pricing before I post documents out of respect for the dealers, but this information is so old I figured no one would care that it was posted. Cha...

In forum Prosport / PR6 / Clubsport Specific Discussions

7 years ago
2.6 V8 RPE Hayabusa for sale

I found this listing on Ebay.co.uk and decided to post it here just in case someone needs one. This is not my engine, I am just providing a link to the information. Attachment : V8 Hayabusa for ...

In forum Radical Parts For Sale / Wanted

7 years ago
RXC Turbo 500 Press Release added to the Resource Library

I just added a copy of the RXC Turbo 500 Press Release added to the Resource Library. Here is a link:

In forum RXC Specific Discussions

7 years ago
Page 102 / 131