CharleyH .

That is a typo. That car is chassis number 531 and is listed in the Registry. It was built in 2010 and sat on a car dealership display floor in Lodi New Jersey with chassis number 576 for many years...

We had a visitor from Finland 🇫🇮 today, so we have been used by people in 34 countries. Welcome!

Neil, do you have a picture of this tank in your car (before the cover was put on)? The drawing you sent me says the tank is ~24” wide. The tank in the Prosport I am working on is ~’40’ wide. What ...

Welcome Gabriel. Where are you located and what is your target budget? Charley

Also, Can you post a picture of the wiring diagram you have? It may come in handy for others with with similar issues. Thanks, Charley

Salvador, I did a little digging into this today and I fund that what you are experiencing could possibly be a failure in the Radical Dash. Apparently you symptoms are fairly common form of Dash fail...

I'm not much help here. The last time I did this was so long ago I used a tool called "Carb Sticks" which were a series of mercury filled tubes that were attached to each throttle body and the goal ...

Bringing this one to the top. Looking forward to getting more cars added to the Registry. If your car isn’t in the Registry, please add it. It only takes a few minutes to add your car. Thanks, Charl...

David, while you are in there can you double check the identification tags on your switch wiring to confirm that they are the same as on the diagram I created? Also, I checked the wiring diagram you ...

David, I saw this ad where the seller has 3 sets of wheels with his car. I don’t know if he would be willing to sell a set separately, but it is worth a call. He is located in Florida. Charley

Strange, I would think the spring would fit over the ball... I guess not. It looks like the hex head is removable. I would think that the spring would go between the ball end and the plastic part th...

That looks like an owner added feature to me. On my SR3 I got throttle position from the Throttle position sensor on the throttle bodies, and brake sensing was through brake pressure sensors. There ...

Can you take a picture of the bracket (both sides) without the springs on it? And a picture of the front and back of the light?

Neil, how is the new fuel cell working out? Any updates? Did you have to send them the hardware or did it come with it? Also roughly how much was it? And how long did it take for them to make it? ...

Dan, how is the rebuild going? Any updates?