Crit Scholer

@proto, Hi, yes I do! -Crit

Thanks to Charley and all the wonderful people on this forum for making the Radical experience amazing. I truly enjoyed restoring my gen 1 sr3 and driving it at Laguna and Auto crossing it. I delivere...

All parts have been sold. Attachment : 20200922_205424.jpg Attachment : 20200922_205511.jpg Attachment : 20200922_205539.jpg Attachment : 20200922_205504.jpg Attachment ...

@gwt561324, Thanks for link! After an hour what does it raise the oil temp to? I know it won’t heat the oil in the bottom of the pan so when you first start it circulating what is your temp reading? A...

@gwt561324, which one did you get and how did you mount it to the tank?

Hi All, considering installing an oil preheater on the the dry sump tank of the SR3 since our cars take so long to warm up. I found two different types, the screw in rod and the external glue on/zip t...

@hende, you're on the other side of the pond and drive on the wrong side of the road. 😆 Still glad to have you on the forum!

@hende, Welcome to the forum and congrats on your SR3. Where are you located and what’s your plan for the SR3. Post some pics and make sure to add your car to the registry if it’s not already there (s...

@meatman, my guess is and it might be off is possibly clutch basket/clutch play. Might be worth draining the oil and removing the clutch cover and inspecting.

@meatman, how about clutch in and in gear? Does the noise disappear?

Hard to tell from the video if the engine is stumbling or if that noise is coming from the clutch, I would recommend pushing the clutch in and putting the car in gear and with it in gear and the clutc...

@kskins1 Is this a K7 or K8? Setup for dry or wet sump?

@gobble, yup, they are just like the plastic ice maker connectors, push the sleeve into the fitting and the hose pulls out.

@tommymills, 100LL is formulated to burn best at higher altitudes and lower RPMs 1500-3000.

@meatman Hi Josh, congratulations on your SR3 purchase and welcome to the forum. Here is a recent post about adding a gear indicator: In regards to the reverse cable, couple of options, there are a f...