Crit Scholer

@m22ble, you have a closed loop system, send them the same picture that you sent me of their GCU showing the GPI-4 sticker and they will make sure to get you the right software. There should be either...

Hi Sam, good news and bad news. Bad news is my software won't work, good news is you have the later designed closed loop system that is a lot safer as it integrates the OEM Suzuki gear position sensor...

Hi Sam, good news and bad news. Bad news is my software won't work, good news is you have the later designed closed loop system that is a lot safer as it integrates the OEM Suzuki gear position sensor...

Hi Sam, does your car have a LIFE ECU or MBE system? If it is MBE you car likely has an open loop geartronics shifter setup and I have the tuning software for it. When I got my car the blipper was int...

@achilles99, yup, just a standard piece of bar aluminum.

@achilles99, picture is worth a thousand words right? Let me know if this is what you're looking for. Attachment : 20200309_174446.jpg

@achilles99, just sat in the car to verify, gas pedal is even with the brake, the clutch is about 1 inch behind the brake.

@johnannz, I've run it at an abandoned military base on the old runways and taxiways and it's probably because the surface of most tracks are a lot cleaner. At the end of the day, it was like somebody...

@achilles99 absolutely no flexing. If Bill can't make one, I can fabricate one for you. Just give Spring Mountain a call and ask for Bill.

Hi all, my car is missing the cover that goes under the front clam to keep debris out of the cockpit. Please let me know if you have one you're willing to part with. Picture of the part is circled in ...

@charleyhradicalsportscarregistry-com Thanks Charley, I'll post in the wanted section. I'll also check with Spring Mountain and see if the part can still be purchased.

I had always wondered why the cockpit would fill up with rocks and debris after a very short time driving it. Looks like my car is missing this black cover panel (circled in red) that goes underneath ...

@achilles99 Here is the throttle extension. Bill bent a piece of bar aluminum and then riveted it to the pedal. Works great Attachment : 20200308_085644.jpg

@achilles99 Hi! I’m 5’6” and Bill at Spring Mountain fabricated a gas pedal extension for me. I’ll shoot a pic tomorrow.

@tmpoquette Glad they were able to get it sorted for you! What are some of the safety concerns they found?