Clark Darrah

@99sh yes, the rear bracket is welded to the chassis.

For what it's worth, I contacted JLS about a question I had regarding the airjack and they were very responsive. Here is what they told me: "If you do attempt to disassemble the air jack you will onl...

@rjbender Not to derail this thread too much but thanks for sharing the configuration you did. I was actually in the process of doing the same thing so this will be very helpful!

You have a different engine than my SR10 but I just went through this process and spoke to some Radical techs about it since the manual was pretty much just directional about the procedure. For my car...

A follow up on a few things after 2 days at the track; No issues with the driveshafts other than more grease coming out of the boot which leads me to believe that using 100g of Red N Tacky is just to...

@parsonsj great video! Sebring is no joke - I'm amazed by how that video looks like it's sped up at twice the speed because of all the bumps!

I was thinking the same thing as David regarding the ECU data. If you haven't already, read through the Radical Sportscars Data Analysis Manual and look at the parameter definitions beginning on p.13...

@parsonsj For what it's worth when I was talking to a Radical tech about the repacking process, they emphasized getting grease in the rollers. They had a special tool that they use to do this but I d...

Thought I would post my experience having completed the 6 hour service on my SR10. By way of background I'm fairly competent doing basic service stuff on my other cars (engine, trans, diff oil change...

Salut, Benoit and congratulations on the car. Sorry to hear about the gearbox after only 2 hours and hope you get it sorted!

Thanks, guys. Very helpful. Removing the plug for the sensor in the oil cannister that @slip_angle shows makes a lot more sense than trying to remove the AN hose to drain the oil out of the canniste...

Thanks, Dan. When you say sump plug, I'm assuming you're talking about the allen bolt that I've circled? The manual doesn't mention this but it totally makes sense. This isn't the first issue I've e...

Any suggestions on how to remove the oil line from the sump? When I turn the hose fitting going to the sump, the adapter in the sump turns with it and there doesn't seem to be enough clearance betwee...

@l8trdave No, I did not drive one. I'm 6'4 and likely wouldn't have fit in one anyways. I've had to do some adjustments to my car to squeeze in there somewhat comfortably. I'll be at VIR at the en...

@l8trdave Hi Dave, I am a member of VIR and just made the switch to a Radical and couldn't be happier. I have a 2016 Viper ACR that I would bring and although I never really had any mechanical issues...