David Flynt

The SR3 cannot be beaten on performance vs cost! Interesting comments on hours, especially from a dealer, as I was fairly sure the factory still recommend on total running hours. Worth keeping in mind...

I have added complete sets of wheels to the sale. The light assemblies are spoken for just waiting for payments. Some side skirts are gone already as well.

G'day All, I've just completed my first SR3 driveshaft rebuild according to the schedule... done at around 12 hours on my HD driveshafts (on-track time) rather than the 10 hours Radical recommend. Li...

End of the year parts sale on select items, all items are brand new: Sale Ended 12/31

@speedstarincdjb, I agree with David, that sounds like the correct next step. I would also check the throttle body boots to see if they have cracked and are leaking. I would also check for any other...

Hi Valentin (@bergfex), welcome to the Registry Forum. Many of the parts for the Gen 1 SR3's are still used on the newer cars so most parts are available through a Radical dealer. The exception is t...

@davidf well the reason I want some fuel is I am waiting for delivery of my car. I live in a rural area and was going to drive a few miles on the highway to get a feel for the car so I wanted it with...

@davidf Thanks. I am just trying to find what is available locally vs buying $95-$115 5 gallon cans of VP, Renegade, or Sunoco. We have 98 (Sunoco 260 GTX) which is nonethanol unleaded. The only ot...

@nautoncall - regarding your questions about the dash only showing 10,000 rpm on the linear scale near the top of the display... It's certainly never been a problem for me as you hardly ever drive whi...

@nautoncall ... there isn't a manual for everything... but there are plenty of resources on this forum under the 'Resource Library'... anything from about 4 different SR3 Owners Manuals, SR3 Mechanics...

@nautoncall ... You'll find that with a few exceptions there's an awful lot that hasn't changed much with the SR3's over time. I've got a good friend with a 2002 car... and I've got a 2015 RSX and a ...

For an SR3 I would recommend that you do not do this. On older F1 cars, SR8 or 10 etc the main reason is to get some heat into the gearbox oil. For an SR3 this is not needed with the engine oil also b...

@meatman - G'day Josh. I was told as a 'baseline' (which worked great as a starting point) to set up the chassis heights as folows; Front height at 80mm from ground level (measured off the flat patc...

Flying lap from yesterday at NJMP on lightning. Not part of a race event so with it unofficially broke the all time NASA track record and SCCA P2 track record

A friend of mine reached out to me to see if I had any pictures of the Billet Uprights used on the SR3 and I thought that others might be interested so I decided to do a post. Here are some pictures ...