David Flynt

Removing and installing the front and rear diffusers is more trouble than it should be because the cap screws are secured with Nylock nuts and washers. The front diffuser is especially tricky, even w...

@raider89 On my diffuser (SR3 XX), the corner skid plates are riveted in (with 5/32 rivets I believe). There were no flat-head Allen cap screws holding these side plates. The center plate does have ...

Dibs on the 2.9 GDU gear set. I will PM my information.

Napa sells boot clamps that are ideal length and 7mm wide for both the small and large clamps. Part #: CVB 6865833 for the small diameter, and CVB 6865834 for the large. Only drawback is price at $2....

I thought I was being clever when I ordered some "universal" cv boot clamps from Amazon. A clamp is a clamp, right? The problem with these is that they are too wide (9mm) to lock the boot into the gr...

Pegasus has the thin jam nuts both right-hand and left-hand threaded in various sizes. The smaller size is 3/8-24 and the larger size (I think) are 1/2-20. Good price and good quality. AN316 Thin Ja...

@raider89 It is just a Snap-on bleeder wrench (item number S6112. ). There are lower cost options on Amazon. Are you talking about the brake disk to hub bolts? I think just take the upright off ...

The bleeder valves for brakes is 10mm and the clutch is 8mm. Brakes can be bled with a short wrench, but the clutch valve is in a very confined area. I bought a specialty wrench with 8 and 10 mm end...

Posted by: @sr10formetoo I have also learned that the estimated container freight delivery is in excess of 100 days. The delays are throughout the shipping food chain. As such I have opted to go wi...

Posted by: @charleyhradicalsportscarregistry-com Anyone going to the Radical Cup race at Sebring in November? I am planning to fly out. I’m not driving but am looking forward to connecting with frie...

My SR3 XX w/o air jacks weighs 1400 lb. This had about 7 gallons of fuel. in it.

where is this track? It looks amazing.

Posted by: @sr10formetoo I have also learned that the estimated container freight delivery is in excess of 100 days. Wow. I am waiting to hear the air freight quote myself. BTW, East Coast shippin...

@sr10formetoo I am looking into air freight option currently; I will let you know what I find. Dealers are sharing containers to reduce cost for their customers -- this can also contribute to the d...

If your car is shipping via container to any of the California Ports (Long Beach, LA, Oakland), then yes it will have a very long shipping journey. The Panama Canal will have a multi-day waiting peri...