dwang2000

@dwang2000 that is just messy.. why you wanna put it on dollies? Just simply tilt your trailer and add long enough ramps.. this simple. If you cant tilt your trailer like i do, Attachment : 1DF4...

Thanks, I thought it was for cooling only. SOLVED: I talked to a Radical race team in the UK, explained the issues. They had an interesting take. They had experienced similar issue trying to get f...

Well this Forum is certainly a good place to learn stuff. Seems like I’m taking my diffuser off using different approach… in my case removing the 6 x bolts that are in the vertical orientation at the ...

Another method if you're using jack stands. I just lay the diffuser under the car in approx the right location. Then sit on the ground behind it, shimmy my legs underneath. Then lift the front up...

@dwang2000 - I usually have the car up on blocks when I drop the diffuser and put it back on. You can do it while it's on the floor, but it is much easier with it lifted up a bit. The car isn't on the...

@dwang2000, I put the diffuser on the floor under the car. Then I take a piece of 2”x 2” that is about four feet long and slide it under the splitter from behind, right in the center of the diffuser. ...

Heheh thats cute🤪🤪 mines are real.. people are shocked to see it on the road Attachment : B8063CC3-1DDC-4184-B755-362C256693BE.jpeg

G'day @dwang2000, Yes... you could try putting a little bit of 'penetrene' or WD40 into the joint first. Mine came off without that, but I had to tap it with a soft faced hammer to get it to start mo...

@dwang2000 ... yep

G'day @maxltv I'm not sure I can answer your question completely, but I can tell you that my SR3RSX does the same thing.... so at least for our cars this seems 'normal' The below table has been share...

A new batch of Radical Sportscar Registry Shirts just arrived and there are some new colors available. Shirts are $30 each or $50 for 2. This price includes shipping in the U.S.. International Ship...

The manual suggests opening the case and draining the fluid that way. Rather than do that and worry about the seal on the case each time, we tend to just remove the lower hose from the case and let dr...

I do it the same way Garrett explained. I also flush the old fluid out of the oil cooler a bit. Flushing the cooler is easy to do when the rear wheels are off of the ground. Simply put the oil retu...

Yep - that's it. ....Same process as the brakes. Not related to bleeding the clutch, but for what it's worth I learned from someone that had plenty of experience, that when bleeding the brakes it pays...

@parsonsj - great information John. I'm not sure if anyone else would be interested, but as another 'new owner' (used my car for the first time last month) I made and laminated a label for the dash ...