Josh Spray

Posted by: @rjbender G'day Josh (@meatman) See below a thread from a week or so ago on the same/similar subject. In one of the posts I wrote up what I did to my wheels and wheel nuts that were in a ...

What's your opinion on the condition of these wheels nuts? They have never backed off, I just don't know any better. Attachment : PXL_20220511_043056117.jpg Attachment : PXL_20220511_0428...

@charleyhradicalsportscarregistry-com Thanks Mr.C....

I had a local shop suggest I install the NGK CR9EIA-9 spark plugs in my 1300 engine. I'm still greene when it comes to these topics. Thoughts?

I'm looking to purchase this sometimes, let me know what you would be looking to get shipped to Burnaby BC Canada.

Should I sand down these pits in the wheel nuts or is that a bad idea?

Posted by: @tmpoquette I have a set of the demonspeed warmers, they work great and the price is reasonable I bought the demon speed tire warmers and was wondering what temperatures you set in betwee...

Posted by: @davidf Attachment : IMG_6689.jpeg This picture shows the bottom of my diffuser. Clearly this is not an ideal design to expose fasteners and fiberglass to frequent contact with the...

Posted by: @raider89 Yes, you want lube on mating conical bearing surface to prevent galling. I typically put on vinyl glove, hold the nut in that hand and very light spray graphite over conical mat...

Posted by: @charleyhradicalsportscarregistry-com I don’t know what the maximum recommended contact area is. I didn't know this. Definitely a good thing to know, hopefully someone knows the answer...

@raider89 I didn't apply the graphite spray to the wheel mating surfaces only the threads on the hub. Should I be spraying the mating surfaces as well?

What should I be looking for as I inspect my car after a track day? I know I need to keep and eye on the uprights for cracking but that's about it. Please share you thoughts and experiences of what t...

Had a slight cargo issue coming back from my last event. 😡😡 It cracked the housing so I'm looking for a replacement.

@rjbender Awesome, thanks for the feedback and the tip. Mine does the same thing if it's too full as I found out the hard way after buying the car (from my local radical dealer) and going straight to ...

Quick question, doing my first oil change and know the sequence for getting the correct level however I am unsure on how the position the dipstick. Is this the correct way to use the dipstick, and I a...