Mike Smith

I've just installed the GIpro unit with their WSS harness in a Prosport. Since I didn't want to have to recalibrate every time I changed sprockets, and because a previous owner removed the factory whe...

Posted by: @clubsport055 @charleyhradicalsportscarregistry-com Despite my car having been a Clubsport initially, it got all the Prosport updates, and about every other thing one could sprinkle money ...

Posted by: @charleyhradicalsportscarregistry-com Mike Smith (@mikesmith), don't you have an extra one of these? At least one, if not several. Eric, let me get you pictures. It'd be coming from Cal...

I ended up mixing the two; ran the sense wire back to the alternator cutoff relay, since I'm fairly confident of the wiring from that point onward. 14.5V solid at the battery, regardless of engine spe...

Posted by: @charleyhradicalsportscarregistry-com Wow, did you figure out how to fix it or are you still investigating? Charley I'm tossing up between just merging the two alternator wires to make it...

Another fun one. 16V at the battery seems like a bad thing. But how? First suspect is the regulator. Getting it out is possible without pulling the ZX11 alternator (let's not talk about putting it ba...

Posted by: @mikesmith possibly the McMaster 6139A27? That would be "yes". Though some of the latches are harder to replace than would be ideal due to the way the ducting is laid in.

Consider loading tail-first. Splitter scrape is still an issue, but entry angle less so... Another option would be to jack the front and put the front wheels onto dollies before winching onto the trai...

Looking for a US source for the Protex spring toggle latches used to fasten the clams to each other and the side pods. They appear to be Protex 27-633SZN or similar; possibly the McMaster 6139A27?

@charleyhradicalsportscarregistry-com Thanks for the confirmation; looks like I'd just need to drill a hole in the upright to run the rivet through, which shouldn't be too bad.

Necro-ing this thread. I found a set of these in a box that came with my Prosport and would like to install them (slightly less terrible than a mess of zipties) but I can't work out what's supposed to...

@rlm-dan When you say "upgraded charging looms", are we just talking from the 2-pin Kawasaki connector to the switch / relay, or does the loom now include the wiring into the alternator? I ask because...

@noble819 58" x 48" x 7" for the part itself. It's not particularly sturdy, so you'd want either a properly stout carton or a properly built plywood shipping crate. Or ideally, someone already going ...

(looks like my previous replies might have been lost, so re-sending) @nick02 It's part of a collection of spares I acquired with the car. According to the PO, the leading edge came loose at speed. If ...

@noble819 Not sure how we'd get this to you (I'm in California), or whether it's too not-perfect, but I don't see myself using / fixing this one anytime soon. Attachment : IMG_2937.jpeg Attac...