John Parsons

Yes, at least swap out the nuts (they have distorted threads that wear each time you tighten them). Howerver, I think Radical sells the whole kit with bolts and nuts. It's not that expensive, and wort...

@bill-snead I think the best advice would be to sell the existing car and find the one you want. If you were to bring it to my shop, that's what I'd encourage you to do. I don't know Radical's stance ...

@bld Yes, I've found the GKN grease to be similar to the Red Line CV-2 that I use. It's light and soft, not heavy and sticky.

@meatman @gabriel That's too bad -- fluid to fluid heat transfer is more efficient than fluid to air. Anyway, BAT might still be worth a call, if you're looking for an alternate supplier. I'm sure the...

@gabriel Does the SR3 use a water to oil cooler? If so, then you will probably find what you're looking for here (if you're in the US): Laminova Oil Cooling | British American Transfer (batinc.net) I ...

This year was pretty unremarkable -- I lost the clutch my first weekend in January, but after I replaced it all was well the rest of the spring. The car has a new Radical engine, and new Kinsler DBW t...

@raider89 Right! If you read the actual procedure (from one of the guides here in the Resource Library), it says nothing about working grease through the rollers. Just wipe everything clean, put new g...

@davidf Seems like the tool can be a real time-saver over my method of working the grease into place via hand. My guess is that the SR10 and SR8 use the same diameter tripods (bigger than the SR3), bu...

I'll defend Radical for once: the upper BJ bolt is 7/16" in diameter, and the bolt head is 5/8" across the flats. 🙂 On the grease, I use Red Line CV-2 (it isn't sticky at all). I don't have any proble...

@rjbender That's gotta be the cleanest Radical sidepod interior I've ever seen!

I live in Orlando, but I actually live to drive at Sebring. 🙂 Looks like you're having a great time! @gordon513

How is your GPS module connected? In mine, AiM had me connect the GPS08/09 to the camera base module, rather than to the CAN expansion module. Is that what Radical does that's different?

I just hit it hard with 18v 1/2 drive impact gun (mine's a Ridgid). Then I mark the wheels and check after each session. Remember to never torque the wheel or hit with a 'gun when hot. Always do that ...

Raising this up. I got my set in two days! Thanks David!

@rjbender Here's another link to that sensor (same color too): Bosch Temperature Sensor - Race Spec (racespeconline.com) Note that it's available in two different threads. One metric 12x1.5, and one 1...