Rod Bender

Does anyone know what font the Radical decal is? I apologize if this has already been answered but I did search with no luck. I have also searched the font websites and couldn’t find a match. My local...

FYI, I updated the video to more accurately show how the forward and reverse gears work.

Here is a short video on how to change the Gear Ratio sets in the SR3 Gear Drive Unit (GDU). Attachment : Cover a.jpg

This sounds like one of those fun issues! If the problem has been with a previous engine and now one this one then we should be able to rule out the engine. I would also suggest that it isn't a proble...

@jonasr1 Another interesting one! Has the problem been since a rebuild or just started? Firstly I would be looking at some basics, although it sounds like you have covered most, have you replaced/che...

@daviff, I agree with @parsonsj that changing spark plugs is worth trying. A few years ago I was out on track and the car lost power and started running roughly and didn't want to idle. I tried a bun...

@parsonsj Nice, I have not tried Chin yet. I was at the PBOC Winterfest in January they put on a great 3 day event with DE, Sprint and Enduro Races, Time Trials and a Live band with free food and beer...

@rojid, This sounds like it is a PDM system issue. Unfortunately I haven't worked with the PDM system yet. Did you check the lights on the sidewall of the cockpit to make sure they are all green? B...

Hi @darrahc, your overall set up looks good but as Rod mentioned you will have to adjust the location a bit. The center of gravity for these cars is just behind the roll bar. When trailering you wil...

Hello everyone, I placed an order for a SR10 back in November and it was finally delivered this week to Wisko. I've been a member of VIR for almost 15 years and will be using it primarily for HPDE ev...

Thanks, Charley! Don't worry, I'm sure I'll be asking a lot of questions! @parsonsj - would love to make it down to Sebring. I was down there years ago for a NARRA event and loved it! @bill-snead - ...

John, you need to drive the SR10 and write up a real world comparison!

Hi Dan (@raider89), I can’t help much here but I can share a few things. Yes, there is a minor loss of clarity when using tear offs, but it is very minor on my Bell helmet. Regarding the folding of...

@rjbender Awesome, thanks for the feedback and the tip. Mine does the same thing if it's too full as I found out the hard way after buying the car (from my local radical dealer) and going straight to ...

Thanks for the info. After a lot of internet searching and actually speaking to real people! I have found that over here in the U.K. a complete assembly is a FG1079-12B1. Got to say, it has not bee...