@davidf, Here is a picture of how the replacement engines are shipped over from the factory. Charley

@davidf No, you fill it from the top like you normally do. After you complete the flush you take out the side plug on the GDU and fill until it just ...

Looks great!

I do it the same way Garrett explained. I also flush the old fluid out of the oil cooler a bit. Flushing the cooler is easy to do when the rear whee...

Hi @stephen, I got your email, but haven’t had a chance to reply. The Neo RHD is great stuff and Radical strongly recommends it. It isn’t cheap, but...

@dwang2000, if you plan to use the car for track days the aluminum tanks can be a good way to go. Fuel cells are required if you plan to race but they...

Hi Victor(@azwcat), sorry for the delay... I found in my notes that the new Floating Rotor thickness is 26.25mm and the thickness for the standard rot...

Hi Victor (azwcat) on many of the rotors the minimum spec is stamped on the edge of the rotor. If you can’t find it let me know and I will dig throu...

Hi Josh (@meatman), I have not taken the side pod off of an SR3SS (Gen 1 car), but I have done it on the SR3RS (Gen 2 car) and I would think the proce...

@davidf, One of my favorite sayings is that Speed cost money... you have to know how fast you can (or want) to afford to be. The great thing about t...

@davidf, I to great to hear how much you are enjoying the car! These really are amazing to drive. The more you drive them the more you love them! ...

What about these for ~$550?

Great. How much are they charging?

Hi @dennis81, those connectors are made by a company called Sure-seal. You should be able to find them on the internet or Spring mountain carries them...