I run the Sunoco GT 260 here in the US in mine. That or VP 100 seems to be the fuel of choice.

Not a pro here. But I ran my first set of Hankook slicks for an entire year. Probably 80 heat cycles. They weren't cycled out and I got to the cords o...

This is finally resolved. I thought I'd post what I learned in case any other mechanically inept soul gets stuck doing this. 1. Get two new seals in...

@kitleslie Is your brake sensor working correctly in the video overlay? I noticed several spots where you have both brake and throttle inputs.

I've had the seal in twice now. Both times fuel still leaked. On the way back out, the seal seemed like it was in good position. There wasn't any sign...

I wondered that too. Putting it in the other way doesn't seem to have any chance of working. There is a second lip inside the hole the seal sits on. I...

Attached are several pictures. Note how the seal sits down in the hole on the second level rather than the first. The bottom of the pump is wider th...

Well I got the new seal and gave installing it a go tonight. I immediately managed to fold it over. Any tips on a mechanical shortcut to keep the se...

@crit Spring Mountain

I've got a seal coming in the mail. According to Spring Mountain there is only one size of seal they are just difficult to get in without folding or b...

Too large in diameter. The seal is "new"in the sense that it was put in the car over the winter along with the aluminum fuel tank.

Those look like a match. Do you know if there are two different sizes of that seal? The one on my pump appears to be a bit too large.

@rjbender - what you are seeing in the Smarty cam footage is just that the video overlay is set to max out at 10k RPM. If you could see the shift ligh...