Not so much going on.. built electrical system to a 2x12v system with li-ion batteries, and one more li-ion battery for start, withthe 24v system. Sti...

Im running 2x12v lithium with total of 20ah in serial, + 1 extra in the back for my 24v starter system all 3 batteries in total weight aprox 2.6...

Brian james RT4 trailer, i tilt it and use 4x wood about 1m long each.. 2x4" and half that again so i step it up from ground. No need for advanced ram...

@rjbender hey bro, i have about 4cm from the ground and up to the lip. Sideskirt sides are about 6cm or so. Ill see if i can find a pic whi...

Wow you guys are making it so advanced.. all you need is a brian james trailer, with tilt, and 1,5m long piece of wood just to make a small ramp. And ...

Its connected with a 12v, a ground and CANBUS HIGH and CANBUS LOW wire.. rest is programming

The Steeringwheel is modified Sparco F10A with ECU master 5" display, running on CANBUSincluded laptimer, Live data for engine parametres, 8 settings ...

For the ones asking.. CP Carillo pistons and rods for hayabusa turbo. 1300cc setup

Not a sports car without some bangbang;)

Earlier this year, compared to a stage 2 m3 (500WHP) on full wot..this was me running at around 0.8bar of boost and 240NM to the wheels.. on ethanol w...

1200cc injectors upgrade. check out the ignition table, we have 4degree correction at after 200kpa. Thats really aggressive. And it still wants more

New day in dyno, running e50 ethanol mix, 205kpa boost made 338hp/340nm to the wheels! Thats about 110nm more to the wheels then last time😂😂 ...

@bjoerneli topdekslet ditt.. den sitter skrudd med 6 skruer som har en "hylse" på seg. Når den butter i toppen din så er det slutt på gjengeparti. Erg...

@bjoerneli sjekk om du tilfeldigvis lekker fra topdekslet ditt.. jeg trodde lenge jeg lakk fra rundt clutch/starter.. var topdekslet. Såffal har jeg e...

Hey bud, really sorry for the late reply, did not see the message, well im out anyway. Im really short on funds due to my turbo project, but my...