CharleyH .

Going through the owner's manual, I noticed 2 missing pictures. Attached are the images I received from Radical. Attachment : Radical Manual Alternator Belt Routing Image.png Attachment : ...

@meatman - I can only help let you know what I did with mine, that looked similar to yours. I ended up machining the faces of the nuts in a lathe. We made a threaded jig (left hand thread on one end,...

30mm. Overall height is 46mm.

@charleyhradicalsportscarregistry-com LOL! Of course you're right! It was chassis 42, not 47.

@davidf many thanks. ok, i ordered - Motul Auto cool Optimal, premixed (was less hassle/just as cost effective as getting concentrate + distilled water) - The concentrate of the above (they add 'ul...

Good stuff! I just missed out on an updated SR10 by 4 cars!

Thanks Charley! This was interesting for me as my SR800047 (the red one now owned by Joe Poland @joep) is actually a 2008 MY. I had been told it was a 2007. I have to revise my memories now!

Yes, you want lube on mating conical bearing surface to prevent galling. I typically put on vinyl glove, hold the nut in that hand and very light spray graphite over conical mating surface which inhe...

I use distilled water and 1/2 bottle of water wetter. Anti-freeze if there is a chance of freezing temperatures. Don't start the car, but turn on power. Remove water temperature sensor which will c...

Posted by: @rjbender The photo of the machined socket really helps! Any chance you could tell me what; - the overall length is? - the inside depth is after you have machine it (ie, the maximum heigh...

There have been some FW problems with the SLM on different systems. You can try unplugging it from the system and powering the PDM, then plugging in the SLM. If it is stuck in booter mode, it might ha...

Hello- Wondering if there are any RXC Coup/Spyder owners local in the So. California area? Would be nice to have a contact to discuss issues or meet up. I have an RXC Spyder V8, registered for road us...

Awesome work sir, this will be so useful for a lot of people!

Hi Joe! On Quaife boxes, the inboard tripode "cups" bolt in place, but the Hewland cups are slip-fit. On the outboard side at the wheels, the cups bolt in place. The axles can plunge in either direct...

Well... Replaced the solenoid and bingo. Starter is back to life. I'll prize apart the old one, curious to know why it failed. I've got a lingering feeling that maybe there's a wider problem causing ...