CharleyH .

@charleyhradicalsportscarregistry-com yes its a bit of a frankenstein. chassis 645. it was an Aim development car for the XX, whilst being raced. It ran like that through the 2021 radical challenge s...

@bluefunelement I recently chatted with someone from Radical who hinted that the halo was being redesigned to be less boxy, but wouldn't commit to anything on retrofit possibilities. I haven't seen on...

Feel like this needs a bump. Anyone get a price on the new 2022 Radical supplied optional halo retro fitted to an older model?

@raider89 ... it's definitely NOT physically impossible to get the mating surfaces on the rims/wheel nuts to be identical in how they come together. In fact its fairly straight forward for any decent...

There is a lot to stay on top of in between sessions, end of day, and prep for the next event. A good list can be found in the owners manual which is pages 49-50 for the newest version of the SR3 XX....

David; I am curious about your 20hr axle tripod grease R&R comment above. My manual says every 10hr, which I have been doing, but seems excessive as grease still in like new condition. On a sid...

@rojid ... I know this sounds stupid, but are you sure that one of the batteries isn't connected in reverse? I'm not exactly sure about where/how you're measuring the voltages, but it seems strange t...

@rjbender Hi Rod. Unfortunately I cannot give you exact measurements at the moment. In the photo of the two 42mm sockets above, mine is on the left and the machined-down one belongs to WISKO on the...

@rjbender The manual says 33mm, but it is actually a 32mm. Also, it is a tight fit for a 42mm impact socket, so these need to be milled and lathed down to clear the frame. The shop rag method that ...

@charleyhradicalsportscarregistry-com that would explain why nobody can find it. Thank you Sir

@rjbender just waiting for a weekend of decent weather here in UK (a rarity) before removing sidepod (following Charley's guide off here!). It wouldn't surprise me if the wiring is a mess and things ...

Great video thank you

Great video, should help many new owners out. Now if we could only find an alternate source for those pricey nuts! 🙂

@rlm-dan Lots of things to try. I have not had time to look at it since a week ago, so I have not checked spark plugs yet. I had not thought about the fuel, but it is possible that I selected the w...

@jonasr1 Another interesting one! Has the problem been since a rebuild or just started? Firstly I would be looking at some basics, although it sounds like you have covered most, have you replaced/che...