CharleyH .

No, I have never had that issue. Are you sure you are using the correct cable? What cable are you using and where are you plugging it in? There are two data download cables that look very similar b...

Posted by: Markus Zunker Hi Charley, thank you very much for your help, i found your original wiring diagram already but your color highlights make it much easier for me, i really appreciate your effo...

The screen is held in place with 4 tie wraps so it can be removed, but I just didn’t think that the flag would get past the screen. In one of the pictures you can see how much duct tape I use (1.5 st...

I thought I was giving it a good cleaning after each event also. :). The second gen cars have a screen that blocks off this area. I didn’t realize how much was getting past the screen. Charley

By the way, here is a picture of the rear side of my side pod after almost 100 hour of track time. You can see that there is some cracking along the bottom edge which is partially caused by the coola...

That picture is showing the front wheel. I have seen this picture before and I understand that this was installed as a precaution. I never got very much wear in the area he is protecting, but I got ...

Here is one more piece of information. The latest version of the Radical Owners manual shows the recommended jacking and lifting points. The Manuals can be found in the Radical Resource Library. Cha...

We just added the Radical Performance (RPE) V8 and 4 Cylinder Engine Handbooks to the Resource Library. A big thank you to Forum member John P. for providing them. Charley Attachment : V8 engine ...

Markus, here are a few images that might help. I highlighted the wiring runs from the dash connector and made a listing of what each pin in the plug goes to. This is from the wiring for the MBE / Fu...

Posted by: John Parsons Markus, I found two files that might be useful for you. One is an old word document about the SR8 wiring loom, which might have some information about the dash connector, and t...

That sounds like a great plan. I’m looking forward to following your progress. Charley

John, while the front nose cooling was optional on the Gen 1 SR3 it was a standard feature on the first Generation SR8's. The second generation SR3's and SR8's used the same cooling system and it was...

A lot of people contact me to get advice on what to look for when buying an SR3 and of course I am always happy to help people transition into Radical ownership. But I find that I repeat the same sto...

Posted by: John Parsons I thought I'd add my own experiences with my 07 SR8. I've made nearly 10-15s improvements in my lap times (at Sebring) over the past two events in February and March, and I'm n...

John, the SR3 and SR8 use the same part. But the RS splitter is not a direct fit on your car. Although with your skills, you could likely make anything fit. By the way, I know someone in Texas that h...