CharleyH .

@fredjacobs, Thanks for the update. You have a great looking car and I appreciate the new pictures! Sorry to hear about the gearbox issue, but I am glad to hear that you got it sorted. Looking forw...

@trailbrake, Radical recommends setting up the dash to show front brake pressure and rear brake pressure and then pressing the bake pedal and comparing the pressure differentials to this chart. The ...

Matt @trailbrake, can you help? Thanks, Charley

I have a friend that is selling a full set of white RXC coupe bodywork in great condition. Let me know if you are interested. Charley

This part has been sold 🙂

Glad to hear that you figured it out!

@lwsr3, I have an extra linkage rod that you can have if you want to try cutting one up an rewelding it in another shape, or bending it. The one that I have is the long one from an SR3 that goes from...

@lwsr3, or perhaps you could fabricate an offset or Z shaped rod? The trick would be to make it stiff enough so it wouldn’t flex when shifting.

Hi Lary (@lwsr3), did you see this post? It appears that Radical made shifters that operated both ways. It depends where the pivot point on the shifter is compared to the push rod. You can likely b...

@lunatic, Looks Great!

We just posted the latest "Ask Phil" Question. Take a look and see if you have had a similar experience.

Hi John (@parsonsj), here it is. 🙂 Attachment : Drive shaft service.JPG

A friend of mine that is a Radical dealer has a brand new SR3 RS / SR8 RX rear diffuser that he wants to sell. He wants $1,400. Let me know if you are interested. Charley

Hi Dan (raider89), It was good talking with you on the phone about this. Here are a few pictures that should help you disconnect the power to the air compressor. Keep in mind that these are from an R...

Hi Larry (@lwsr3), Unfortunately the early “Radical Dash’s” are prone to failure. You can do some troubleshooting for the sensors to make sure they are working and then check the continuity of the wi...